Shaft formwork made easy with the LOGO.3 dismantling inside corner postMaking work easier in concrete construction
The dismantling inside corner post is a very practical addition to the LOGO.3 formwork system. When constructing the shell, the movable dismantling inside corner post greatly reduces time required to form and dismantle the inner formwork for lift shafts, stairway cores and structures with tight spaces.
This system addition was first presented to trade professionals in 2013 at the bauma trade fair where it was met with great enthusiasm. Now, almost all trade partners have integrated the LOGO.3 dismantling inside corner post in their range and many customers have purchased it to expand their formwork materials, as the dismantling inside corner post is also compatible with the LOGO alu formwork system.
Developed by practitioners for daily use on construction sites
Each dismantling inside corner post has a hexagon nut on the top of the inside corner post in order to open or close the side parts.
An SW36 spanner can be used for this or a DW15 tie rod which fits in the drill hole of the hexagon nut would also work.
The lengths of the dismantling inside corner posts are adapted to the height of the LOGO.3 formwork system elements from 75 cm to 340 cm.
If larger formwork heights are required, the dismantling inside corner posts can also be connected together at their joints. A bolt is inserted into the hexagon screw head of the lower dismantling inside corner post. This allows the whole corner to be opened or closed from the top element.
Particular attention was given to ensuring that the dismantling inside corner posts can be easily pushed together or can be put in position without the inner formwork having to be disassembled.
The individual dismantling inside corner post elements are joined together with the wedge clamp or multi clamp at the joints, exactly like the formwork elements.
Adjustable by 5 cm
The benefits of PASCHAL's dismantling inside corner post can particularly be seen when dismantling the formwork. They can be adjusted by approx. 50 mm on each side. When rectracting the corner posts, the entire inner formwork frame can be loosened and moved at a stroke. This completely eliminates the need to disassemble the inner formwork.
PASCHAL's LOGO.3 dismantling inside corner post is thus a valuable system addition and a beneficial tool for concrete workers.
The LOGO.3 dismantling inside corner post on a construction site:
After retracting the corner posts, the complete inner formwork can be lifted out with a crane and reused.
Some observations have shown that when using formwork for a shaft at standard floor height, the formwork time is considerably reduced compared to the traditional options thanks to the adjustable LOGO.3 dismantling inside corner posts.
« Current News
The benefits of PASCHAL's dismantling inside corner post can particularly be seen when dismantling the formwork. The size of the inner formwork element can be reduced by up to a total of 5 cm.